LGA Fish Cooling Pump Repair
Agency: | DEPT OF DEFENSE |
---|---|
Level of Government: | Federal |
Category: |
|
Opps ID: | NBD00159291666344442 |
Posted Date: | Dec 20, 2022 |
Due Date: | Jan 10, 2023 |
Solicitation No: | W912EF23Q0016 |
Source: | https://sam.gov/opp/54a57be619... |
Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.
- Contract Opportunity Type: Solicitation (Original)
- All Dates/Times are: (UTC-08:00) PACIFIC STANDARD TIME, LOS ANGELES, USA
- Original Published Date: Dec 20, 2022 02:00 pm PST
- Original Date Offers Due: Jan 10, 2023 04:00 pm PST
- Inactive Policy: 15 days after date offers due
- Original Inactive Date: Jan 25, 2023
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: J043 - MAINT/REPAIR/REBUILD OF EQUIPMENT- PUMPS AND COMPRESSORS
-
NAICS Code:
- 333996 - Fluid Power Pump and Motor Manufacturing
-
Place of Performance:
Dayton , WA 99328USA
Intent
The Grundfos KWM pump, which is part of the fish ladder cooling system, is damaged beyond field serviceable levels. The Grundfos KWM pump will be repaired to the original manufacturer specifications.
Scope
Perform evaluation of the Grundfos KWM pump upon receiving and repair to restore factory performance of the pump. Upon completion of refurbishment, restore the pump with a 1yr parts and labor warranty.
Fish Ladder Cooling Pump
Successful offeror shall perform all repairs to return the Grundfos KWM.40”.265.10.T.60.650.M.46 to serviceable condition.
Grundfos KWM.40”.265.10.T.60.650.M.46 Repair Condition (CLIN 0001) The spare KWM pump experienced motor wire lead damage causing water intrusion into the submerged pump. The subject pump will be disassembled and inspected. Depending on the results of the inspection, various parts may be required to repair and fully re-assemble the pump.
Recommended work scope will include inspection and replacement if required:
-
Clean, disassemble and inspect entire unit.
-
Supply and install:
- New Upper and lower bearings
- New Upper and lower mechanical seals
- New thermal and moisture switches, temperature and leakage sensors
- New Gaskets, O-rings and lubricants
- Bake/test stator assembly – determine final status
- Re-wind stator
- New power cables and control cable
-
Supply and install:
- Reassemble, and dry test entire unit with IO/SM modules
- Paint entire unit with black industrial enamel and prepare for shipping.
See attached solicitation for full details
- KO CONTRACTING DIVISION 201 NORTH 3RD AVE
- WALLA WALLA , WA 99362-1876
- USA
- Victoria Conway
- victoria.l.conway@usace.army.mil
- Phone Number 5095277449
- Sara Edwards
- sara.edwards@usace.army.mil
- Phone Number 5095277216
- Dec 20, 2022 02:00 pm PSTSolicitation (Original)
- Dec 08, 2022 10:37 am PST Sources Sought (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.