Washington Bids > Bid Detail

INTENT TO SOLE SOURCE-Operator Training for ANCA tool grinding machine.

Agency:
Level of Government: Federal
Category:
  • U - Education and Training Services
Opps ID: NBD00159150909617248
Posted Date: Mar 1, 2024
Due Date: Mar 8, 2024
Source: https://sam.gov/opp/68b38dccb9...
Follow
INTENT TO SOLE SOURCE-Operator Training for ANCA tool grinding machine.
Active
Contract Opportunity
Notice ID
N4523A24Q1308
Related Notice
Department/Ind. Agency
DEPT OF DEFENSE
Sub-tier
DEPT OF THE NAVY
Major Command
NAVSEA
Sub Command
NAVSEA SHIPYARD
Office
PUGET SOUND NAVAL SHIPYARD IMF
General Information
  • Contract Opportunity Type: Special Notice (Original)
  • All Dates/Times are: (UTC-08:00) PACIFIC STANDARD TIME, LOS ANGELES, USA
  • Original Published Date: Feb 29, 2024 03:33 pm PST
  • Original Response Date: Mar 08, 2024 09:00 am PST
  • Inactive Policy: 15 days after response date
  • Original Inactive Date: Mar 23, 2024
  • Initiative:
    • None
Classification
  • Original Set Aside:
  • Product Service Code: U008 - EDUCATION/TRAINING- TRAINING/CURRICULUM DEVELOPMENT
  • NAICS Code:
    • 611430 - Professional and Management Development Training
  • Place of Performance:
    Silverdale , WA 98315
    USA
Description

THIS NOTICE OF INTENT IS NOT A REQUEST FOR QUOTES. A DETERMINATION NOT TO COMPETE THE PROPOSED PROCUREMENT BASED UPON RESPONSES TO THIS NOTICE IS SOLELY WITHIN THE DISCRETION OF THE GOVERNMENT.



The Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF) Contracting Office (Code 400), hereby provides notice of its intent to award a sole-source, firm fixed service contract to ANCA GRINDING INC. The contract is expected to be awarded under FAR 13.106-1(b)(1)(i). A Justification and Approval for Other Than Full and Open Competition has been prepared. The period of performance shall be from approximately 01 April 2024 through 31 March 2025 for a base plus option year from 01 April 2025 through 31 March 2026.



INTENT TO SOLE SOURCE - Operator Training for ANCA Tool Grinding Machine



The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.



ANCA tool grinding machine and software are unique and proprietary provided only by ANCA company. Due to the complex nature of the tool cutting and complex geometry needed, training is only provided by ANCA company on ANCA machines. This is a non-personal services contract to provide operator training for the ANCA tool grinding machine.



THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES; no solicitation or RFQ will be forthcoming. However, interested parties may identify their interest and capability to respond to this requirement no later than 8 March 2024 by 0900 AM Pacific Time.



Interested parties are encouraged to furnish information by email only with subject line stating - RESPONSE TO INTENT TO SOLE SOURCE FOR N4523A24Q131308



A determination to compete this requirement, based upon responses to this notice, is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.



PSNS and IMF Contracting Office (Code 400) will NOT be responsible for any costs incurred by interested parties in responding to this notice of intent. Only written responses will be considered. All responses from responsible sources will be fully considered. As a result of analyzing responses to this notice of intent, the Government shall determine if a solicitation will be issued. Any prospective contractor must be registered in the System for Award Management (SAM) in order to be eligible for award.



All documents submitted will not be returned. All interested parties shall submit clear and convincing documentation demonstrating their capabilities to satisfy the requirements listed above to Purchasing agent, Patrick Scott by email at patrick.j.scott.civ@us.navy.mil and Contracting Officer, Angela Charpia at angela.m.charpia.civ@us.navy.mil. The capability documentation should include general information and technical background describing in detail the prospective contractor's capabilities and experience that will demonstrate the ability to support these requirements.




Attachments/Links
Contact Information
Contracting Office Address
  • 1400 FARRAGUT AVE
  • BREMERTON , WA 98314-5001
  • USA
Primary Point of Contact
Secondary Point of Contact
History
  • Feb 29, 2024 03:33 pm PSTSpecial Notice (Original)

TRY FOR FREE

Not a USAOPPS Member Yet?

Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.

Start Free Trial Today >