Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

Revised 13 Sep 2023 The solicitations are due on 19 Sep 2023 at 0700 local. The Sign in from the site visit has been added and an updated room 216 drawing has been added. The COMBO Solicitation has also been updated and Questions are answered below.

1. Walls Free standing vs. attached:
   
   
   
   1. Walls can be mechanically attached to the wall (with proposed door) and to both sides of post.
      
      
      
      1. The East Wall (between Ops Floor and DOT office) needs to be attached via Velcro or some other adhesive option not requiring penetration of Classified wall. This is in reference to the single panel wall between post and wall.
      
      
      
      
   
   
   
   


2. Door location:
   
   
   
   1. Keep door close to where is currently shown (south wall). There can be some flexibility to distance to make installation work, especially when temp wall can be attached to permanent wall/stud of concrete/brick (located several inches behind sheetrock)
   
   
   2. If this is a showstopper, we can keep an opening on south wall where door would have been installed.
   
   
   3. Slider option, open to this as an option – didn’t know about it until today.
   
   
   
   

This purchase is for the purchase of office furniture and flex walls for the 225th ADS at JBLM, WA. For full combo solicitation and details see attachments.